{"title":"Tekton L-Keys","description":"","products":[{"product_id":"t7-star-l-key","title":"T7 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487633217,"sku":"TT-KLT22070","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/w9bwj8fojrvmbdpqtvby.jpg?v=1771362919"},{"product_id":"t9-star-l-key","title":"T9 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487665985,"sku":"TT-KLT22090","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/na6w6zmxbxane5lcgrzq.jpg?v=1771362924"},{"product_id":"t8-star-l-key","title":"T8 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487731521,"sku":"TT-KLT22080","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/n8mwtkpmhddb4q3nryuf.jpg?v=1771362919"},{"product_id":"ball-end-hex-and-star-l-key-set-with-holders-41-piece-0-050-3-8-in-1-3-10-mm-t6-t50","title":"Ball End Hex and Star L-Key Set with Holders, 41-Piece (0.050 - 3\/8 in., 1.3 - 10 mm, T6 - T50)","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eThe Tekton 41-pc. Ball End Hex and Star L-Key Set includes the most common inch hex, metric hex, and star key sizes, all stored in durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487764289,"sku":"TT-KEY91002","price":81.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/mls0vku287qzfxxlnhfx.jpg?v=1771362921"},{"product_id":"t6-star-l-key","title":"T6 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487797057,"sku":"TT-KLT22060","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/rsv5wbyvoda8hbksowsl.jpg?v=1771362922"},{"product_id":"flat-end-hex-and-star-l-key-set-with-holders-41-piece-0-050-3-8-in-1-3-10-mm-t6-t50","title":"Flat End Hex and Star L-Key Set with Holders, 41-Piece (0.050-3\/8 in., 1.3-10 mm, T6-T50)","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n  • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n  • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n  • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n  • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking\u003cbr\u003eThe Tekton 41-Piece Flat End Hex and Star L-Key Set includes 0.050–3\/8 inch and 1.3–10 mm flat end hex L-keys, T6–T50 star L-keys, and holders. The keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487829825,"sku":"TT-KEY91003","price":81.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/bzw1f0bx1wygruqp3eoj.jpg?v=1771362922"},{"product_id":"t10-star-l-key","title":"T10 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487862593,"sku":"TT-KLT22100","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/adi63griy7f0gq8mhuri.jpg?v=1771362920"},{"product_id":"t15-star-l-key","title":"T15 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487928129,"sku":"TT-KLT22150","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/y2uksobaatpqvugb4yoj.jpg?v=1771362920"},{"product_id":"t30-star-l-key","title":"T30 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487960897,"sku":"TT-KLT22300","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/du0wfu5h2ockrkmfx5o9.jpg?v=1771362924"},{"product_id":"t50-star-l-key","title":"T50 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400487993665,"sku":"TT-KLT22500","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/ry5mvtdellf2fzugumha.jpg?v=1771362925"},{"product_id":"t25-star-l-key","title":"T25 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488026433,"sku":"TT-KLT22250","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/op3x4gpb8alcwlkwmxtd.jpg?v=1771362921"},{"product_id":"t45-star-l-key","title":"T45 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488059201,"sku":"TT-KLT22450","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/zitz5ko6sjlhqe7anzxp.jpg?v=1771362923"},{"product_id":"t27-star-l-key","title":"T27 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488091969,"sku":"TT-KLT22270","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/kjfvqp4c8sqozcpoial1.jpg?v=1771362926"},{"product_id":"t40-star-l-key","title":"T40 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488124737,"sku":"TT-KLT22400","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/rl5wlf34whpwn1i4r4sd.jpg?v=1771362922"},{"product_id":"1-16-inch-flat-end-hex-l-key","title":"1\/16 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The size is marked with a high-visibility laser marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488157505,"sku":"TT-KLX12063","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/kkpuoi9uluopnsmasrwg.jpg?v=1771362920"},{"product_id":"1-8-inch-flat-end-hex-l-key","title":"1\/8 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488190273,"sku":"TT-KLX12125","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/ps0wr8mxdx6wa6octcj5.jpg?v=1771362923"},{"product_id":"star-l-key-set-with-holder-13-piece-t6-t50","title":"Star L-Key Set with Holder, 13-Piece (T6 - T50)","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution\u003cbr\u003eThe Tekton 13-pc. Star L-Key Set includes the most common star key sizes from T6 to T50 stored in a durable holder with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488223041,"sku":"TT-KLT91402","price":34.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/mnddhaczshk2giiatkgc.jpg?v=1771362925"},{"product_id":"3-32-inch-flat-end-hex-l-key","title":"3\/32 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488255809,"sku":"TT-KLX12094","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/bmsvoj3wyp7eu6usinmf.jpg?v=1771362927"},{"product_id":"9-64-inch-flat-end-hex-l-key","title":"9\/64 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488288577,"sku":"TT-KLX12141","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/dqkqmlshul1qejekj7ne.jpg?v=1771362924"},{"product_id":"5-64-inch-flat-end-hex-l-key","title":"5\/64 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The size is marked with a high-visibility laser marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488321345,"sku":"TT-KLX12078","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/nk3rxfxkjp64vglhegpu.jpg?v=1771362921"},{"product_id":"0-050-inch-flat-end-hex-l-key","title":"0.050 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Maximum Torque Strength – The maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488354113,"sku":"TT-KLX12050","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/uhnixwfe0biktmu0wimw.jpg?v=1771362922"},{"product_id":"t20-star-l-key","title":"T20 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488386881,"sku":"TT-KLT22200","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/aoiar9klcce9jph0bfd8.jpg?v=1771362924"},{"product_id":"7-64-inch-flat-end-hex-l-key","title":"7\/64 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488419649,"sku":"TT-KLX12109","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/gzjix93yszylqnzdt9tf.jpg?v=1771362925"},{"product_id":"3-16-inch-flat-end-hex-l-key","title":"3\/16 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488452417,"sku":"TT-KLX12188","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/tu0q1pilycjnomgzicof.jpg?v=1771362926"},{"product_id":"5-16-inch-flat-end-hex-l-key","title":"5\/16 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488485185,"sku":"TT-KLX12313","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/mxmwnnllh5fdrypyudus.jpg?v=1771362926"},{"product_id":"5-32-inch-flat-end-hex-l-key","title":"5\/32 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488517953,"sku":"TT-KLX12156","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/ljgvy0ozcm9rhkgaf3m7.jpg?v=1771362927"},{"product_id":"7-32-inch-flat-end-hex-l-key","title":"7\/32 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488550721,"sku":"TT-KLX12219","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/za0aop61zwajyvepb090.jpg?v=1771362928"},{"product_id":"7-16-inch-flat-end-hex-l-key","title":"7\/16 Inch Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488583489,"sku":"TT-KLX12438","price":14.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/j2lk2qj4puqhdkkovvqw.jpg?v=1771362924"},{"product_id":"1-2-inch-flat-end-hex-l-key","title":"1\/2 Inch Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488616257,"sku":"TT-KLX12500","price":15.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/kyglvbfjdou2ibiicbgi.jpg?v=1771362925"},{"product_id":"5-8-inch-flat-end-hex-l-key","title":"5\/8 Inch Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488649025,"sku":"TT-KLX12625","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/dhxh64s4bpdekga23igi.jpg?v=1771362926"},{"product_id":"9-16-inch-flat-end-hex-l-key","title":"9\/16 Inch Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488681793,"sku":"TT-KLX12563","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/konaw6beygxokooydmek.jpg?v=1771362928"},{"product_id":"3-4-inch-flat-end-hex-l-key","title":"3\/4 Inch Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488714561,"sku":"TT-KLX12750","price":29.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/nnbqsf30vvjw9glmzsqh.jpg?v=1771362927"},{"product_id":"11-16-inch-flat-end-hex-l-key","title":"11\/16 Inch Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488747329,"sku":"TT-KLX12688","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/l2djmshx0yivteceirep.jpg?v=1771362925"},{"product_id":"1-4-inch-flat-end-hex-l-key","title":"1\/4 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488780097,"sku":"TT-KLX12250","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/ggv2zdye7ylspkjpuxxb.jpg?v=1771362932"},{"product_id":"1-5-mm-flat-end-hex-l-key","title":"1.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The size is marked with a high-visibility laser marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488812865,"sku":"TT-KLX22015","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/ceygdhqiskkybaeokzk0.jpg?v=1771362926"},{"product_id":"3-mm-flat-end-hex-l-key","title":"3 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488845633,"sku":"TT-KLX22030","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/otwquloajtpddgka0ks6.jpg?v=1771362927"},{"product_id":"3-8-inch-flat-end-hex-l-key","title":"3\/8 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488878401,"sku":"TT-KLX12375","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/elvurd14a5g7yctxfcr4.jpg?v=1771362930"},{"product_id":"4-5-mm-flat-end-hex-l-key","title":"4.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488911169,"sku":"TT-KLX22045","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/j8eoms2rquku3ktbs85h.jpg?v=1771362929"},{"product_id":"3-5-mm-flat-end-hex-l-key","title":"3.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488943937,"sku":"TT-KLX22035","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/eqk54pwkmgcdhndsrzyz.jpg?v=1771362927"},{"product_id":"2-mm-flat-end-hex-l-key","title":"2 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The size is marked with a high-visibility laser marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400488976705,"sku":"TT-KLX22020","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/q22gebf6egqutkenlxak.jpg?v=1771362925"},{"product_id":"1-3-mm-flat-end-hex-l-key","title":"1.3 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Maximum Torque Strength – The maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489009473,"sku":"TT-KLX22013","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/fn266t3knygvldy4bbdi.jpg?v=1771362929"},{"product_id":"4-mm-flat-end-hex-l-key","title":"4 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489042241,"sku":"TT-KLX22040","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/oqd6aezwzuztsjdxwyve.jpg?v=1771362931"},{"product_id":"2-5-mm-flat-end-hex-l-key","title":"2.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489075009,"sku":"TT-KLX22025","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/ho75jwm22pfu4vdcnsgc.jpg?v=1771362930"},{"product_id":"5-mm-flat-end-hex-l-key","title":"5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489107777,"sku":"TT-KLX22050","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/mtzv3luhc5paxuas6lim.jpg?v=1771362929"},{"product_id":"7-mm-flat-end-hex-l-key","title":"7 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489140545,"sku":"TT-KLX22070","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/u1bqn0mmgfxbduddntk5.jpg?v=1771362933"},{"product_id":"5-5-mm-flat-end-hex-l-key","title":"5.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489173313,"sku":"TT-KLX22055","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/jbrozgcu5onqdzvpi3r6.jpg?v=1771362931"},{"product_id":"6-mm-flat-end-hex-l-key","title":"6 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489206081,"sku":"TT-KLX22060","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/nj3zkavlcqrufgx4aot1.jpg?v=1771362934"},{"product_id":"10-mm-flat-end-hex-l-key","title":"10 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489238849,"sku":"TT-KLX22100","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/kk2jj01fsob3m7l5ip8n.jpg?v=1771362931"},{"product_id":"8-mm-flat-end-hex-l-key","title":"8 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489271617,"sku":"TT-KLX22080","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/hddxp6sa9k5dbjwdqd4u.jpg?v=1771362937"},{"product_id":"11-mm-flat-end-hex-l-key","title":"11 mm Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Tekton","offers":[{"title":"1","offer_id":51400489304385,"sku":"TT-KLX22110","price":14.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/2767\/8273\/files\/of1s8pbjhp1slti8z8ar.jpg?v=1771362931"}],"url":"https:\/\/boltsandnuts.com\/collections\/tekton-l-keys.oembed","provider":"BoltsandNuts.com","version":"1.0","type":"link"}